Reasonable price for China 316 Seamless Steel Coil Tubing in Coil ASTM A269 Bright and Annealed 1/4*0.049inch

We’ve been ready to share our knowledge of internet marketing worldwide and recommend you suitable products at most competitive price ranges. So Profi Tools give you best value of money and we’ve been ready to create with each other with Reasonable price for China 316 Seamless Steel Coil Tubing in Coil ASTM A269 Bright and Annealed 1/4*0.049inch, We have been wanting ahead to setting up cooperative associations along with you. Make sure you contact us for more data.
We’ve been ready to share our knowledge of internet marketing worldwide and recommend you suitable products at most competitive price ranges. So Profi Tools give you best value of money and we’ve been ready to create with each other with China Stainless Steel Tubing, Stainless Steel Pipe, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which might be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we’ll continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
Introduction

stainless steel coil tube
stainless steel tube coil
stainless steel coil tubing
stainless steel coil pipe
stainless steel coil tube suppliers
stainless steel coil tube manufacturers
stainless steel pipe coil

904L is a non-stabilised low carbon high alloy austenitic stainless steel. The addition of copper to this grade gives it greatly improved resistance to strong reducing acids, particularly sulphuric acid. It is also highly resistant to chloride attack – both pitting / crevice corrosion and stress corrosion cracking.

This grade is non-magnetic in all conditions and has excellent weldability and formability. The austenitic structure also gives this grade excellent toughness, even down to cryogenic temperatures.

904L does have very substantial contents of the high cost ingredients nickel and molybdenum. Many of the applications in which this grade has previously performed well can now be fulfilled at lower cost by duplex stainless steel 2205 (S31803 or S32205), so it is used less commonly than in the past.

Key Properties

These properties are specified for flat rolled product (plate, sheet and coil) in ASTM B625. Similar but not necessarily identical properties are specified for other products such as pipe, tube and bar in their respective specifications.

STAINLESS STEEL COIL TUBE SUPPLIERS

STAINLESS STEEL COIL TUBE MANUFACTURER IN CHINA, STAINLESS STEEL COIL TUBE 304, STAINLESS STEEL 304L COIL TUBE, STAINLESS STEEL COILED TUBING SUPPLIERS

316 STAINLESS STEEL COIL TUBING, STAINLESS STEEL 316L COIL TUBE DEALER, STAINLESS STEEL 201 COIL TUBES SUPPLIER, SS COIL TUBE EXPORTER, STAINLESS STEEL WELDED COIL TUBE, STEEL COIL TUBING

LIAOCHENG SIHE STAINLESS STEEL  is privately owned  Supplier of Stainless Steel Coil Tube, stainless steel welded pipe manufactured as per with national and international standards.We are also stockist and distributor of Stainless stee Seamless coil Tube and Stainless Steel Welded Coil Tube.LIAOCHENG SIHE STAINLESS STEEL has earned the status of preferred Stainless Steel Coil Tube manufacturer in China.Our Stainless Steel Coil Tubings is available in a variety of sizes and can be cut and polished to your specifications. We are well known supplier, stockist & distributor of Coil Tubingin a number of standard sizes and grades, including 304/304Land 316/316L Alloy 625 825  Lenght :800-3500M/COIL Coil stainless steel tubing widely used in the petrochemical, natural gas, oil and gas, and geothermal applications.Buy SS Coil tube best price in China.

Liaocheng sihe stainless steel material limited company is a leading manufacturer  of wide size range & wall thickness in Inconel 625 Seamless Tubing for aerospace, chemical & Pharma industry. For high corrosion resistant applications Alloy 625 Welded tubing is the best option and used to manufacture Aircraft components. Alloy 625 exhaust tubing is useful material to manufacture high quality tubing for oil & gas, Food Processing as well power generation Industries.

▼STAINLESS STEEL COIL TUBE SPECIFICATION

  1. Standards: ASTM A269/A249 standard
  2. Grade: TP304, TP316L 304 316 310S 2205  825 625
  3. Out diameter:6.52-25.4mm
  4. 3.Trade Name : SS304 Coiled Tubes, SS316 Coiled Tubes, Duplex Coiled Tubes, Monel 400 Coiled Tubes, Hastelloy Coiled Tubes, Inconel coiled Tubes, 904L Coiled Tubes, Seamless Coiled Tubes, Welded Coiled Tubing
  5. Think:0.2-2MM
  6. Tolerance: OD± 0.1mm, wall thickness: ±10%, length: ±5mm
  7. 6.Length:300-3500M/coil
  8. packaging:iron pallet ,wooden pallet ,poly bag
  9. application : refrigeration equipment, evaporator, gas liquid delivery, condenser, beverage machine
  10. 4.  state:soft / half hard / soft bright annealing
  11. 5. Specifications : outer diameter 6.52mm-20mm, wall thickness: 0.40mm-1.5mm
  12. Tolerance range: diameter: + 0.1mm, wall thickness: + 10%, length: -0/+6mm
  13. Length:800-3500M or  according to customer requirements.
  14. Product advantages: surface polishing and fine, uniform wall thickness, tolerance precision etc..
  15. Commonly Size of stainless steel coiled tube: we can product them as your request.
Stainless Steel Coil Tube Outside Diameter 6.25MM-25.4mm
Stainless Steel Coil Tube Thickness 0.2mm – 2mm
Stainless Steel Coil Tube Grades TP – 304,304L,316,316L,201 ALLO 625 825  2205 ect
Stainless Steel Seamless Coil Tubing Specifications ASTM A213 (average wall) and ASTM A269
Stainless Steel Welded Coil Tubing Specifications ASTM A249 and ASTM A269

Stainless Steel Coil Tube (WELDED  AND SEAMLESS304/L OR 316/L)

At LIAOCHENG SIHE STAINLESS STEEL  offers Stainless Steel Coil Tube in sizes from 6.35to 25.4 MM. and wall thickness from 0.2 to 2 . Generally, these SS Coil Tubing is available in lengths up to 3500m.Stainless steel tube straighteners make stainless steel coiled tubing installation faster and easier.We offer a comprehensive range of SS Coil Tubes to our customers in various industry verticals. According to the different applications, the Stainless Steel Seamless Coil Tubesavailable in different sizes. We can customize the ideal Stainless Steel Coil Tubingfor your unique application.Contact to LIAOCHENG SIHE STAINLESS STEEL for confirm availability and pricing.

As a largest stockholder of Stainless Steel Coil Tube, we have huge inventory of Stainless Steel 304 Coil Tube, Stainless Steel 304L Coil Tube,Stainless Steel 316 Coil Tube,Stainless steel 316L Coil Tube and stainless Steel 201 Coil Tube.

KEY BENEFITS OF STAINLESS STEEL COIL TUBING
Improved system safety and reliability – Stainless Steel Coil Tube restricted tolerance controls yield superior sealing performance.
Xtreme™ length – SS coil tube length up to 30% longer continuous length compared to competitive options

STAINLESS STEEL COIL TUBE MECHANICAL PROPERTIES

Material Heat Temperure Tensile Strength Yield Strength Elongation %, Min
Treatment Min. Ksi (MPa), Min. Ksi (MPa), Min.
º F(º C)
TP304 Solution 1900 (1040) 75(515) 30(205) 35
TP304L Solution 1900 (1040) 70(485) 25(170) 35
TP316 Solution 1900(1040) 75(515) 30(205) 35
TP316L Solution 1900(1040) 70(485) 25(170) 35

▼Stainless steel coiled tubing /coiled tubes material grade:

U.S.A.

 GERMANY

GERMANY

 FRANCE

JAPAN

 ITALY

SWEDEN

 U.K.

E.U.

 SPAIN

 RUSSIA

AISI

DIN 17006

W.N. 17007

AFNOR

JIS

 UNI

SIS

BSI

EURONORM

201

SUS 201

301

 X 12 CrNi 17 7

1.4310

 Z 12 CN 17-07

SUS 301

X 12 CrNi 1707

 23 31

 301S21

 X 12 CrNi 17 7

 X 12 CrNi 17-07

302

 X 5 CrNi 18 7

1.4319

 Z 10 CN 18-09

SUS 302

 X 10 CrNi 1809

 23 31

 302S25

 X 10 CrNi 18 9

 X 10 CrNi 18-09

 12KH18N9

303

 X 10 CrNiS 18 9

 1.4305

 Z 10 CNF 18-09

SUS 303

 X 10 CrNiS 1809

 23 46

 303S21

 X 10 CrNiS 18 9

 X 10 CrNiS 18-09

303 Se

 Z 10 CNF 18-09

SUS 303 Se

 X 10 CrNiS 1809

 303S41

 X 10 CrNiS 18-09

 12KH18N10E

304

 X 5 CrNi 18 10

X 5 CrNi 18 12

1.4301

1.4303

 Z 6 CN 18-09

SUS 304

 X 5 CrNi 1810

 23 32

 304S15

 304S16

  X 6 CrNi 18 10

   X 6 CrNi 19-10

 08KH18N10

06KH18N11

304 N

SUS 304N1

 X 5 CrNiN 1810

304 H

SUS F 304H

 X 8 CrNi 1910

 X 6 CrNi 19-10

304 L

 X 2 CrNi 18 11

 1.4306

 Z 2 CN 18-10

SUS 304L

 X 2 CrNi 1911

 23 52

304S11

 X 3 CrNi 18 10

 X 2 CrNi 19-10

 03KH18N11

 X 2 CrNiN 18 10

 1.4311

 Z 2 CN 18-10-Az

SUS 304LN

 X 2 CrNiN 1811

 23 71

305

 Z 8 CN 18-12

SUS 305

 X 8 CrNi 1812

 23 33

 305S19

 X 8 CrNi 18 12

 X 8 CrNi 18-12

 Z 6 CNU 18-10

SUS XM7

 X 6 CrNiCu 18 10 4 Kd

309

 X 15 CrNiS 20 12

 1.4828

 Z 15 CN 24-13

SUH 309

 X 16 CrNi 2314

 309S24

 X 15 CrNi 23 13

309 S

SUS 309S

 X 6 CrNi 2314

 X 6 CrNi 22 13

310

 X 12 CrNi 25 21

 1.4845

SUH 310

 X 22 CrNi 2520

 310S24

 20KH23N18

310 S

 X 12 CrNi 25 20

 1.4842

 Z 12 CN 25-20

SUS 310S

 X 5 CrNi 2520

 23 61

 X 6 CrNi 25 20

 10KH23N18

314

 X 15 CrNiSi 25 20

 1.4841

 Z 12 CNS 25-20

 X 16 CrNiSi 2520

 X 15 CrNiSi 25 20

 20KH25N20S2

316

 X 5 CrNiMo 17 12 2

 1.4401

 Z 6 CND 17-11

SUS 316

 X 5 CrNiMo 1712

 23 47

 316S31

 X 6 CrNiMo 17 12 2

 X 6 CrNiMo 17-12-03

316

 X 5 CrNiMo 17 13 3

 1.4436

 Z 6 CND 17-12

SUS 316

 X 5 CrNiMo 1713

 23 43

 316S33

 X 6 CrNiMo 17 13 3

 X 6 CrNiMo 17-12-03

316 F

 X 12 CrNiMoS 18 11

 1.4427

316 N

SUS 316N

316 H

SUS F 316H

 X 8 CrNiMo 1712

 X 5 CrNiMo 17-12

316 H

 X 8 CrNiMo 1713

 X 6 CrNiMo 17-12-03

316 L

 X 2 CrNiMo 17 13 2

 1.4404

 Z 2 CND 17-12

SUS 316L

 X 2 CrNiMo 1712

 23 48

 316S11

 X 3 CrNiMo 17 12 2

 X 2 CrNiMo 17-12-03

 03KH17N14M2

 X 2 CrNiMoN 17 12 2

 1.4406

 Z 2 CND 17-12-Az

SUS 316LN

 X 2 CrNiMoN 1712

316 L

 X 2 CrNiMo 18 14 3

 1.4435

 Z 2 CND 17-13

 X 2 CrNiMo 1713

 23 53

 316S13

 X 3 CrNiMo 17 13 3

 X 2 CrNiMo 17-12-03

 03KH16N15M3

 X 2 CrNiMoN 17 13 3

 1.4429

 Z 2 CND 17-13-Az

 X 2 CrNiMoN 1713

 23 75

 X 6 CrNiMoTi 17 12 2

 1.4571

 Z6 CNDT 17-12

 X 6 CrNiMoTi 1712

 23 50

 320S31

 X 6 CrNiMoTi 17 12 2

 X 6 CrNiMoTi 17-12-03

 08KH17N13M2T

10KH17N13M2T

 X 10 CrNiMoTi 18 12

 1.4573

 X 6 CrNiMoTi 1713

 320S33

 X 6 CrNiMoTI 17 13 3

 X 6 CrNiMoTi 17-12-03

 08KH17N13M2T

10KH17N13M2T

 X 6 CrNiMoNb 17 12 2

 1.4580

 Z 6 CNDNb 17-12

 X 6 CrNiMoNb 1712

 X 6 CrNiMoNb 17 12 2

 08KH16N13M2B

 X 10 CrNiMoNb 18 12

 1.4583

X 6 CrNiMoNb 1713

 X 6 CrNiMoNb 17 13 3

 09KH16N15M3B

317

SUS 317

 X 5 CrNiMo 1815

 23 66

 317S16

317 L

 X 2 CrNiMo 18 16 4

 1.4438

 Z 2 CND 19-15

SUS 317L

 X 2 CrNiMo 1815

 23 67

 317S12

 X 3 CrNiMo 18 16 4

317 L

 X 2 CrNiMo 18 16 4

 1.4438

 Z 2 CND 19-15

SUS 317L

 X 2 CrNiMo 1816

 23 67

 317S12

 X 3 CrNiMo 18 16 4

 330

X 12 NiCrSi 36 16

1.4864

Z 12NCS 35-16

SUH 330

321

 X 6 CrNiTi 18 10

X 12 CrNiTi 18 9

 1.4541

 1.4878

 Z 6 CNT 18-10

SUS 321

 X 6 CrNiTi 1811

 23 37

 321S31

 X 6 CrNiTi 18 10

 X 6 CrNiTi 18-11

 08KH18N10T

321 H

SUS 321H

 X 8 CrNiTi 1811

 321S20

 X 7 CrNiTi 18-11

 12KH18N10T

329

 X 8 CrNiMo 27 5

 1.4460

SUS 329J1

 23 24

347

 X 6 CrNiNb 18 10

 1.4550

 Z 6 CNNb 18-10

SUS 347

 X 6 CrNiNb 1811

 23 38

 347S31

 X 6 CrNiNb 18 10

 X 6 CrNiNb 18-11

 08KH18N12B

347 H

SUS F 347H

 X 8 CrNiNb 1811

 X 7 CrNiNb 18-11

904L

1.4939

Z 12 CNDV 12-02

 X 20 CrNiSi 25 4

 1.4821

UNS31803

 X 2 CrNiMoN 22 5

 1.4462

UNS32760

X 3 CrNiMoN 25 7

1.4501

Z 3 CND 25-06Az

403

 X 6 Cr 13

X 10 Cr 13

X 15 Cr 13

 1.4000

 1.4006

 1.4024

 Z 12 C 13

SUS 403

 X 12 Cr 13

 23 02

 403S17

 X 10 Cr 13

X 12 Cr 13

 X 6 Cr 13

 12Kh13

405

 X 6 CrAl 13

1.4002

 Z 6 CA 13

SUS 405

 X 6 CrAl 13

 405S17

 X 6 CrAl 13

 X 6 CrAl 13

 X 10 CrAl 7

 1.4713

 Z 8 CA 7

 X 10 CrAl 7

 X 10 CrAl 13

 1.4724

 X 10 CrAl 12

 10Kh13SYu

 X 10 CrAl 18

 1.4742

X 10 CrSiAl 18

 15Kh18SYu

409

 X 6 CrTi 12

 1.4512

 Z 6 CT 12

SUH 409

 X 6 CrTi 12

 409S19

 X 5 CrTi 12

 X 2 CrTi 12

410

 X 6 Cr 13

X 10 Cr 13

X 15 Cr 13

 1.4000

 1.4006

 1.4024

 Z 10 C 13

Z 12 C 13

SUS 410

 X 12 Cr 13

 23 02

 410S21

 X 12 Cr 13

 X 12 Cr 13

 12Kh13

410 S

 X 6 Cr 13

 1.4000

 Z 6 C 13

SUS 410S

 X 6 Cr 13

 23 01

 403S17

 X 6 Cr 13

 08Kh13

414

▼Size of Stainless steel Coil Tube

ITEM

Grade

Size
(MM)

Pressure
(Mpa)

Length
(M)

1

316L、304L、304 alloy  625 825 2205 2507

1/8″×0.025″

3200

500-2000

2

316L、304L、304 alloy  625 825 2205 2507

1/8″×0.035″

3200

500-2000

3

316L、304L、304 alloy  625 825 2205 2507

1/4″×0.035″

2000

500-2000

4

316L、304L、304 alloy  625 825 2205 2507

1/4″×0.049″

2000

500-2000

5

316L、304L、304 alloy  625 825 2205 2507

3/8″×0.035″

1500

500-2000

6

316L、304L、304 alloy  625 825 2205 2507

3/8″×0.049″

1500

500-2000

7

316L、304L、304 alloy  625 825 2205 2507

1/2″×0.049″

1000

500-2000

8

316L、304L、304 alloy  625 825 2205 2507

1/2″×0.065″

1000

500-2000

9

316L、304L、304 alloy  625 825 2205 2507

φ3mm×0.7mm

3200

500-2000

10

316L、304L、304 alloy  625 825 2205 2507

φ3mm×0.9mm

3200

500-2000

11

316L、304L、304 alloy  625 825 2205 2507

φ4mm×0.9mm

3000

500-2000

12

316L、304L、304 alloy  625 825 2205 2507

φ4mm×1.1mm

3000

500-2000

13

316L、304L、304 alloy  625 825 2205 2507

φ6mm×0.9mm

2000

500-2000

14

316L、304L、304 alloy  625 825 2205 2507

φ6mm×1.1mm

2000

500-2000

15

316L、304L、304 alloy  625 825 2205 2507

φ8mm×1mm

1800

500-2000

16

316L、304L、304 alloy  625 825 2205 2507

φ8mm×1.2mm

1800

500-2000

17

316L、304L、304 alloy  625 825 2205 2507

φ10mm×1mm

1500

500-2000

18

316L、304L、304 alloy  625 825 2205 2507

φ10mm×1.2mm

1500

500-2000

19

316L、304L、304 alloy  625 825 2205 2507

φ10mm×2mm

500

500-2000

20

316L、304L、304 alloy  625 825 2205 2507

φ12mm×1.5mm

500

500-2000

▼Stainless steel coiled tube coiled tubing stock range

Item

O.D (mm)

3.0-4.0

4.01-6.00

6.01-8.00

8.01-10.0

10.01-12.7

12.71-19.05

19.05-25.4
 W.T (mm)

Stainless Steel Coiled Tubes/ Coil Tubing

0.30-0.40

√

√

√

 

Stainless Steel Coiled Tubes/ Coil Tubing

0.41-0.50

√

√

√

√

 

Stainless Steel Coiled Tubes/ Coil Tubing

0.51-0.60

√

√

√

√

√

 

Stainless Steel Coiled Tubes/ Coil Tubing

0.61-0.70

√

√

√

√

√

√

 

Stainless Steel Coiled Tubes/ Coil Tubing

0.71-1.00

√

√

√

√

√

√

√

Stainless Steel Coiled Tubes/ Coil Tubing

1.01-1.20

√

√

√

√

√

√

Stainless Steel Coiled Tubes/ Coil Tubing

1.21-1.50

√

√

√

√

Stainless Steel Coiled Tubes/ Coil Tubing

1.51-2.0

 

 

 

 

√

√

√

▼Our advantages:

We are a stainless steel coiled tube/pipe manufacturer.

We can control the quality of pipe by ourselves.

The length of the pipes  is more than 3500M/Coil.

▼Stainless steel coiled tubes /coiled tubing other garde:

l Stainless Steel 304 Coiled Tubes/ Coil Tubing

l Stainless Steel 304L Coiled Tubes/ Coil Tubing

l Stainless Steel 304H Coiled Tubes/ Coil Tubing

l Stainless Steel 316 Coiled Tubes/ Coil Tubing

l Stainless Steel 316L Coiled Tubes/ Coil Tubing

l Stainless Steel 316H Coiled Tubes/ Coil Tubing

l Stainless Steel 317L Coiled Tubes/ Coil Tubing

l Stainless Steel 321 Coiled Tubes/ Coil Tubing

l Stainless Steel 347 Coiled Tubes/ Coil Tubing

l Stainless Steel 410 Coiled Tubes/ Coil Tubing

l Stainless Steel 904L Coiled Tubes/ Coil Tubing

l Stainless Steel 310S Coiled Tubes/ Coil Tubing

l Stainless Steel 310 Coiled Tubes/ Coil Tubing

l Stainless Steel 310H Coiled Tubes/ Coil Tubing

l Stainless Steel 316Ti Coiled Tubes/ Coil Tubing

l Stainless Steel 321H Coiled Tubes/ Coil Tubing

l Stainless Steel 347 Coiled Tubes/ Coil Tubing

l Stainless Steel 347H Coiled Tubes/ Coil Tubing

▼Seamless coiled tubing is a no. 1 choice in most of the critical applications as there is no risk of impurities that are often associated with welded coiled tubing.

u Made available in custom lengths

u Improved system safety and reliability

u Greater corrosion resistance

u Reduces the use of fittings, preventing the possibilities of leaks and other long-term failures

u Reduced installation costs – installation involves less time and efforts

▼Description:

Our company has three production line of stainless steel coiled tube ,stainless steel pipe ,we have exporting experience for more than ten years ,the bending, stretching, saw cutting,

stamping, polishing and so on a series of processing equipment , our stainless steel product widely used in bathroom pendant, hanger accessories, hardware, and condensation water

heating equipment, hotel supplies and so on. our company sincerely hope that domestic and foreign customers to provide drawings or samples.

We have experience to export stainless steel tube products  for more than ten years.

Description:  Liaocheng sihe stainless steel material Limited company production of stainless

steel coil has ten years of history, has two production lines can produce continuous welded pipe, equipment is perfect, the technology leader. But the company introduced the world first-class

bright annealing technology, can online stainless steel pipe softening treatment. In addition, we also have compressed, flaring, bending test, hardness 100%, stretch, air tightness test and so on,

the price is reasonable, quality is reliable, the current US 80% coil export to all over the world.

▼Seamless coiled tubing is a no. 1 choice in most of the critical applications as there is no risk of impurities that are often associated with welded coiled tubing.

  • Made available in custom lengths
  • Improved system safety and reliability
  • Greater corrosion resistance
  • Reduces the use of fittings, preventing the possibilities of leaks and other long-term failures
  • Reduced installation costs – installation involves less time and efforts

▼STAINLESSS STEEL COILED TUBES /COILED TUBING APPLICATION

  • Food & Beverage Industry
  • Petrochemical
  • CNG Piping Jobs
  • Boilers
  • Desalination Plants
  • Geothermal Plants
  • Heat Exchangers
  • Instrumentation Jobs
  • Mechanical Jobs
  • Oil and Gas Equipments and Piping Works

AVAILABLE STOCK OF SS COIL TUBE

Stainless Steel Tubing Coil 3/4 Manufacturer in China Stainless Steel Tubing Coil 1/4 Manufacturer in China
1′ Stainless Steel Coil Tubing Suppliers Stainless Steel Tubing Coil 1/2 Exporter
stainless steel tube coil heat exchanger stainless steel tube coil suppliers
Stainless Steel 304 Seamless Coil Tubing suppliers Stainless Steel 316 Seamless Coil Tubing suppliers
316 Stainless Steel Coil Tubing Manufacturer in China stainless steel cooling coil tube supplier
SS 304 Coil Tube Suppliers SS 316L Coil Tube Manufacturer in China
SS 316 Coil Tube Suppliers Stainless Steel Welded Coil Tube Suppliers
Stainless Steel Seamless Coil Tube Supplier SS Seamless Coil Tube Supplier
Stainless Steel Coil Tubing Supplier Coil Stainless Steel Tubing Supplier
Stainless Steel Coil Tube Supplier Stainless Steel Coil Tube Exporter
304 Stainless Steel Coil Tube Manufacturer in China SS 316L Coil Tube Manufacturer in China
Stainless Steel Coil Tube Size Chart Stainless Steel Coil Tubing for Sale
Stainless Steel Bright Annealed Coil Tube 304L Stainless Steel Coil Tube Manufacturer
Stainless Steel 201 Coil Tubes Supplier Stainless Steel Coil 316 Tube Supplier
3/8 stainless steel tubing coil Manufacturer in China Stainless Steel Coil Tube 304 Manufacturer in China
SS Coil Tube Manufacturer in India 316 Stainless Steel Coil Tube Supplier
Hot Rolled Stainless Steel Coil Tube supplier 316L Stainless Steel Coil Tube Supplier
2 Stainless Steel Coil Tube Manufacturer in China 201 Stainless Steel Coil Tube Manufacturer in China
1/2 o.d. x 50′ Stainless Steel Coil Tube Supplier SS 316 Coil Tube Manufacturer in China
food grade stainless steel tubing coil Supplier Schedule 40 Stainless Steel Coil Tube Supplier
1/2 inch stainless steel coil tubing Supplier Schedule 80 Stainless Steel Coil Tube Supplier
1/4 inch stainless steel coil tubing Supplier Schedule 10 Stainless Steel Coil Tube Supplier
3/4 inch stainless steel tubing coil Supplier Sch 5 Stainless Steel Coil Tube Supplier
1/2 od stainless steel tubing coil Supplier Stainless Steel Welded Coil Tube Manufacturer
15/16 stainless steel tubing coil Supplier 1/16 stainless steel tubing coil
13/16 stainless steel tubing coil Supplier SS 304L Coil Tube Suppliers

stainless steel coil tube

 

    • Reasonable price for China 316 Seamless Steel Coil Tubing in Coil ASTM A269 Bright and Annealed 1/4*0.049inch Related Video:

    Related Products

    OEM/ODM Factory Capillary Tube Stainl...
    Wholesale Small Diameter Stainless St...
    Factory Supply China 304 201 ASTM Col...
    PriceList for Stainless Steel Exchang...
    Renewable Design for 316 Hs Code For ...
    Trending Products 316ln Stainless Ste...
    WhatsApp Online Chat !