2205


Introduction

Stainless steels are high-alloy steels. These steels are available in four groups that include martensitic, austenitic, ferritic and precipitation-hardened steels. These groups are formed based on the crystalline structure of stainless steels.

Stainless steels contain larger amounts of chromium in comparison with other steels and thus have good corrosion resistance. Most of the stainless steels contain about 10% of chromium.

Grade 2205 stainless steel is a duplex stainless steel whose design enables combining improved resistance to pitting, high strength, stress corrosion, crevice corrosion and cracking. Grade 2205 stainless steel resists sulfide stress corrosion and chloride environments.

The following datasheet provides an overview of grade 2205 stainless steel.

Chemical Composition

The chemical composition of grade 2205 stainless steel is outlined in the following table.

Element

Content (%)

Iron, Fe

63.75-71.92

Chromium, Cr

21.0-23.0

Nickel, Ni

4.50-6.50

Molybdenum, Mo

2.50-3.50

Manganese, Mn

2.0

Silicon, Si

1.0

Nitrogen, N

0.080-0.20

Carbon, C

0.030

Phosphorous, P

0.030

Sulfur, S

0.020

Physical Properties

The following table shows the physical properties of grade 2205 stainless steel.

Properties

Metric

Imperial

Density

7.82 g/cm³

0.283 lb/in³

Mechanical Properties

The mechanical properties of grade 2205 stainless steel are displayed in the following table.

Properties

Metric

Imperial

Tensile strength at break

621 MPa

90000 psi

Yield strength (@strain 0.200 %)

448 MPa

65000 psi

Elongation at break (in 50 mm)

25.0 %

25.0 %

Hardness, Brinell

293

293

Hardness, Rockwell c

31.0

31.0

Thermal Properties

The thermal properties of grade 2205 stainless steel are given in the following table.

Properties

Metric

Imperial

Thermal expansion co-efficient (@20-100°C/68-212°F)

13.7 µm/m°C

7.60 µin/in°F

Other Designations

Equivalent materials to grade 2205 stainless steel are:

Fabrication and Heat Treatment

Annealing

Grade 2205 stainless steel is annealed at 1020-1070°C (1868-1958°F) and then water quenched.

Hot Working

Grade 2205 stainless steel is hot worked in the temperature range of 954-1149°C (1750-2100°F). Hot working of this grade stainless steel under room temperature is recommended whenever possible.

Welding

Welding methods recommended for grade 2205 stainless steel include SMAW, MIG, TIG and manual covered electrode methods. During the welding process, the material should be cooled below 149°C (300°F) between passes and preheating of the weld piece should be avoided. Low heat inputs should be used for welding grade 2205 stainless steel.

Forming

Grade 2205 stainless steel is difficult to form due to its high strength and work hardening rate.

Machinability

Grade 2205 stainless steel can be machined with either carbide or high speed tooling. The speed is reduced by about 20% when carbide tooling is used.

Applications

Grade 2205 stainless steel is used in the following applications:

WhatsApp Online Chat !