Factory best selling Stainless Steel Capillary Tubing - AISI 300 Series Steel Sheet Stainless Steel Plate – Sihe

Product Detail

Stainless steel sheet

Thickness: 10mm-100mm & 0.3mm-2mm
Width: 1.2m, 1.5m or as per request
Technique: Cold rolled or hot rolled
Surface treatment: Polished or as requirement

Application:
Steel sheet applies to construction field, ships building industry, petroleum& chemical industries, war and electricity industries, food processing and boiler heat exchanger machinery and hardware fields etc.
Quality standard: GB 3274-2007 or equivalent to ASTM/JIS/DIN/BS etc

Steel grade:
200, 300, 400 series
( 201, 202, 304, 304L, 309S, 310S, 316, 316L, 317L, 321, 347H, 409410S, 420, 430, etc)

Type: Steel plate
Special use: High-strength steel plate
If you need, pls contact with me freely. Your response will be highly appreciated.

1. Chemical Requirements

pecification	Steel Grade	C%	Si%	Mn%	P%	S%	Cr%	Ni%	Mo%	Ti%	OTHER
pecification	Steel Grade	Max.	Max.	Max.	Max.	Max.	Cr%	Ni%	Mo%	Ti%	OTHER
JIS	SUS301	0.15	1	2	0.045	0.03	16.00-18.00	6.00-8.00
G4303	SUS302	0.15	1	2	0.045	0.03	17.00-19.00	8.00-10.00
G4304	SUS304	0.08	1	2	0.045	0.03	18.00-20.00	8.00-10.50
G4305	SUS304L	0.03	1	2	0.045	0.03	18.00-20.00	9.00-13.00
G4312	SUS304J3	0.08	1	2	0.045	0.03	17.00-19.00	8.00-10.50			Cu:1.00-3.00
	SUH309	0.2	1	2	0.045	0.03	22.00-24.00	12.00-15.00
	SUS309S	0.08	1	2	0.045	0.03	22.00-24.00	12.00-15.00
	SUH310	0.25	1.5	2	0.045	0.03	24.00-26.00	19.00-22.00
	SUS310S	0.08	1.5	2	0.045	0.03	24.00-26.00	19.00-22.00
	SUS316	0.08	1	2	0.045	0.03	16.00-18.00	10.00-14.00	2.00-3.00
	SUS316L	0.03	1	2	0.045	0.03	16.00-18.00	12.00-15.00	2.00-3.00
	SUS317	0.08	1	2	0.045	0.03	18.00-20.00	11.00-15.00	3.00-4.00
	SUS321	0.08	1	2	0.045	0.03	17.00-19.00	9.00-13.00		5*C Min.
	SUS347	0.08	1	2	0.045	0.03	17.00-19.00	9.00-13.00			Nb:10*C Min.
	SUSXM7	0.08	1	2	0.045	0.03	17.00-19.00	8.50-10.50			Cu:3.00-4.00
	SUH409	0.08	1	1	0.04	0.03	10.50-11.75			6*C to 0.75
	SUH409L	0.03	1	1	0.04	0.03	10.50-11.75			6*C to 0.75
	SUS410	0.15	1	1	0.04	0.03	11.50-13.50
	SUS420J1	0.16-0.25	1	1	0.04	0.03	12.00-14.00
	SUS420J2	0.26-0.40	1	1	0.04	0.03	12.00-14.00
	SUS430	0.12	0.75	1	0.04	0.03	16.00-18.00
	SUS434	0.12	1	1	0.04	0.03	16.00-18.00		0.75~1.25


ASTM Specification

Specification	Steel Grade	C%	Si%	Mn%	P%	S%	Cr%	Ni%	Mo%	Ti%	OTHER
Specification	Steel Grade	Max.	Max.	Max.	Max.	Max	Cr%	Ni%	Mo%	Ti%	OTHER
ASTM	S30100	0.15	1	2	0.045	0.03	16.00-18.00	6.00-8.00			N:0.10 Max
A240	S30200	0.15	0.75	2	0.045	0.03	17.00-19.00	8.00-10.00			N:0.10 Max
	S30400	0.08	0.75	2	0.045	0.03	18.00-20.00	8.00-10.5			N:0.10 Max
	S30403	0.03	0.75	2	0.045	0.03	18.00-20.00	8.00-12.00			N:0.10 Max
	S30908	0.08	0.75	2	0.045	0.03	22.00-24.00	12.00-15.00
	S31008	0.08	1.5	2	0.045	0.03	24.00-26.00	19.00-22.00
	S31600	0.08	0.75	2	0.045	0.03	16.00-18.00	10.00-14.00	2.00-3.00		N:0.10 Max
	S31603	0.03	0.75	2	0.045	0.03	16.00-18.00	10.00-14.00	2.00-3.00		N:0.10 Max
	S31700	0.08	0.75	2	0.045	0.03	18.00-20.00	11.00-15.00	3.00-4.00		N:0.10 Max
	S32100	0.08	0.75	2	0.045	0.03	17.00-19.00	9.00-12.00		5*(C+N) Min.	N:0.10 Max
	S32100	0.08	0.75	2	0.045	0.03	17.00-19.00	9.00-12.00		0.70 Max	N:0.10 Max
	S34700	0.08	0.75	2	0.045	0.03	17.00-19.00	9.00-13.00			Cb:10*CM in.
	S34700	0.08	0.75	2	0.045	0.03	17.00-19.00	9.00-13.00			1.00 Max
	S40910	0.03	1	1	0.045	0.03	10.50-11.70	0.5Max			Ti:6*CMin.
	S40910	0.03	1	1	0.045	0.03	10.50-11.70	0.5Max			0.5 Max.
	S41000	0.15	1	1	0.04	0.03	11.50-13.50	0.75Max
	S43000	0.12	1	1	0.04	0.03	16.00-18.00	0.75Max