Discount wholesale Stainless Steel Round Tube - AISI 304 stainless steel polishing tube – Sihe
304 stainless steel polishing tube:
stainless steel coil tube
stainless steel tube coil
stainless steel coil tubing
stainless steel coil pipe
stainless steel coil tube suppliers
stainless steel coil tube manufacturers
stainless steel pipe coil
General Properties
Alloy 304L a T-300 series stainless steel austenitic, which has a minimum of 18% chromium and 8% nickel. Type 304L has a carbon maximum is 0.030. It is the standard “18/8 stainless” that is commonly found in pans and cooking tools. Alloys 304L is the most versatile and widely used alloy in the stainless steel family. Ideal for a wide variety of home and commercial applications, Alloys 304L exhibits excellent corrosion resistance and has a high ease of fabrication, outstanding formability. The austenitic stainless steels are also considered to be the most weldable of the high-alloy steels and can be welded by all fusion and resistance welding processes.
Specifications: UNS S30403
Applications:
Alloy 304L Stainless Steel is used in a wide variety of home and commercial applications, including:
Food processing equipment, particularly in beer brewing, milk processing, and wine making
Kitchen benches, sinks, troughs, equipment, and appliances
Architectural trim and molding
Automotive and aerospace structural use
Construction material in large buildings
Chemical containers, including for transport
Heat exchangers
Nuts, bolts, screws, and other fasteners in the marine environment
Dyeing industry
Woven or welded screens for mining, quarrying & water filtration
Standards:
ASTM/ASME: S30403
EURONORM: 1.4303
AFNOR: Z2 CN 18.10
DIN: X2 CrNi 19 11
Corrosion Resistance:
Resistance to corrosion in oxidizing environments is a result of the 18 to 19% chromium that the 304 alloys contain.
Resistance to moderately aggressive organic acids is a result of the 9 to 11% nickel that the 304 alloys contain.
At times, alloy 304L may show a lower corrosion rate than the higher carbon Alloy 304; otherwise, the 304, 304L, and 304H may be considered to perform uniformly in most corrosive environments.
Alloy 304L is preferred for use in environments sufficiently corrosive to cause intergranular corrosion of welds and heat-affected zones on susceptible alloys.
Heat Resistance:
Good oxidation resistance in intermittent service to 1600°F and in continuous service to 1690°F.
Continuous use of 304 in the 800-1580°F range is not recommended if subsequent aqueous corrosion resistance is important.
Grade 304L is more resistant to carbide precipitation and can be heated into the above temperature range.
Properties of 304 Alloy
Welding Characteristics:
Excellent welding properties; post-weld annealing is not required when welding thin sections. Two important considerations in producing weld joints in the austenitic stainless steels are:
preservation of corrosion resistance
avoidance of cracking
Processing – Hot Forming:
To forge, heat uniformity to 2100 / 2300 °F
Do not forge below 1700 °F
Forging can be air cooled without danger of cracking
Processing – Cold Forming:
Its austenitic structure allows it to be deep-drawn without intermediate annealing, Making this the stainless steel grade of choice in the manufacturing of sinks, hollow-ware and saucepans.
These grades work harden rapidly. To relieve stresses produced in severe forming or spinning, parts should be full annealed or stress relief annealed as soon as possible after forming.
Machinability:
The use of chip breakers is advised since the chips can be stringy. Stainless steel work harden rapidly, heavy positive feeds, sharp tooling, and a rigid set-up should be used.of cut below the work-hardened layer resulting from the previous passes.
Chemical Properties:
| C | Mn | Si | P | S | Cr | Ni | N | |
| 304L | 0.03max | 2.0max | 0.75max | 0.45max | 0.03max | min: 18.0 max: 20.0 | min: 8.0 max: 12.0 |
0.10 max |
Mechanical Properties:
| Grade | Tensile Strength ksi (min) | Yield Strength 0.2% ksi (min) | Elongation % | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
| 304L | 70 | 25 | 40 | 201 | 92 |
Physical Properties:
| Density lbm/in3 |
Thermal Conductivity (BTU/h ft. °F) |
Electrical Resistivity (in x 10-6) |
Modulus of Elasticity (psi x 106 |
Coefficient of Thermal Expansion (in/in)/ °F x 10-6 |
Specific Heat (BTU/lb/ °F) |
Melting Range (°F) |
| at 68°F: 0.285 | 9.4 at 212°F | 28.3 at 68°F | 28 | 9.4 at 32 – 212°F | 0.1200 at 68°F to 212°F | 2500 to 2590 |
| 12.4 at 932 °F | 39.4 at 752°F | 10.2 at 32 – 1000°F | ||||
| 49.6 at 1652 °F | 10.4 at 32 – 1500°F |
Specification:
Item:stainless steel polishing pipe
Type:welded or seamless
Standard:ASTM A554 JIS ,DIN
Grade:201,202, 304, 304L,316, 316L,409, 430,etc
Size:Round pipe:OD 8-219m
Square Pipe: OD 10x10mm -150x150mm
Rectangle Pipe:10x20mm to 120x180mm
Thickness:0.2-4.0mm
Pipe surface:180G, 320G, 400G, 500G, 600G,Satin, hairline, 2B,BA, mirror,8K
Pipe length:5.8m 6M 11.85M 12m
Application:
1.Decoration usage(road,bridge handrail,railing,bus stop,airport and gym
2.Construction and ornament
3.Industry area(petroleum,food,chemical,paper,fertilizer,fabric,aviation and nuclear.
| Square Steel Tube(mm) | Rectangular Steel Tube (mm) |
Round Steel Tube (mm) |
| 10×10×0.6~3.0 | 10×20×0.6~3.0 | 6×0.6~1.0 |
| 15×15×0.6~3.0 | 20×30×0.6~3.0 | 12×0.6~1.5 |
| 20×20×0.6~3.0 | 20×40×0.6~3.0 | 13×0.6~1.5 |
| 25×25×0.6~3.0 | 25×50×0.6~3.5 | 16×0.6~2.0 |
| 30×30×0.6~3.5 | 30×50×0.6~3.5 | 19×0.6~3.0 |
| 40×40×0.6~3.5 | 40×60×0.6~3.5 | 20×0.6~3.0 |
| 50×50×0.6~3.5 | 40×80×0.6~3.5 | 22×0.6~3.0 |
| 60×60×0.6~3.5 | 60×80×1.0~6.0 | 25×0.6~3.0 |
| 70×70×0.6~3.5 | 50×100×1.0~6.0 | 27×0.6~3.0 |
| 75×75×0.6~3.5 | 60×120×1.0~6.0 | 32×0.6~3.0 |
| 80×80×1.0~6.0 | 80×120×2.0~8.0 | 40×0.6~3.5 |
| 100×100×2.0~8.0 | 80×160×2.0~8.0 | 38×0.6~3.0 |
| 120×120×2.0~8.0 | 100×150×2.0~8.0 | 48×0.6~3.5 |
| 150×150×2.0~8.0 | 100×200×2.0~8.0 | 60×0.6~3.5 |
| 200×200×4.0~16.0 | 150×250×4.0~12.0 | 76×0.6~3.5 |
| 250×250×4.0~16.0 | 200×300×4.0~16.0 | 89×1.0~6.0 |
| 300×300×4.0~16.0 | 300×400×4.0~16.0 | 104×1.0~6.0 |
| 400×400×4.0~16.0 | 300×500×4.0~16.0 | 114×1.0~6.0 |
The physical properties of stainless steel polishing pipe:
|
Grade |
Composition, % |
|||||||||
|
Carbon, |
Manga- |
Phos- |
Sulfur, |
Silicon, |
Nickel |
Chromium |
Molybdenum |
Titanium |
Columbium + Tantalum |
|
| Austenitic | ||||||||||
| 301 |
0.15 |
2.00 |
0.040 |
0.030 |
1.00 |
6.0–8.0 |
16.0–18.0 |
… |
… |
… |
| 302 |
0.15 |
2.00 |
0.040 |
0.030 |
1.00 |
8.0–10.0 |
17.0–19.0 |
… |
… |
… |
| 304 |
0.08 |
2.00 |
0.040 |
0.030 |
1.00 |
8.0–11.0 |
18.0–20.0 |
… |
… |
… |
| 304L |
0.035A |
2.00 |
0.040 |
0.030 |
1.00 |
8.0–13.0 |
18.0–20.0 |
… |
… |
… |
| 305 |
0.12 |
2.00 |
0.040 |
0.030 |
1.00 |
10.0–13.0 |
17.0–19.0 |
… |
… |
… |
| 309S |
0.08 |
2.00 |
0.040 |
0.030 |
1.00 |
12.0–15.0 |
22.0–24.0 |
… |
… |
. . . |
| 309S-Cb |
0.08 |
2.00 |
0.040 |
0.030 |
1.00 |
12.0–15.0 |
22.0–24.0 |
… |
… |
B |
| 310S |
0.08 |
2.00 |
0.040 |
0.030 |
1.00 |
19.0–22.0 |
24.0–26.0 |
… |
… |
… |
| 316 |
0.08 |
2.00 |
0.040 |
0.030 |
1.00 |
10.0–14.0 |
16.0–18.0 |
2.0–3.0 |
… |
… |
| 316L |
0.035A |
2.00 |
0.040 |
0.030 |
1.00 |
10.0–15.0 |
16.0–18.0 |
2.0–3.0 |
… |
… |
| 317 |
0.08 |
2.00 |
0.040 |
0.030 |
1.00 |
11.0–14.0 |
18.0–20.0 |
3.0–4.0 |
… |
… |
| 321 |
0.08 |
2.00 |
0.040 |
0.030 |
1.00 |
9.0–13.0 |
17.0–20.0 |
… |
C |
… |
| 330 |
0.15 |
2.00 |
0.040 |
0.030 |
1.00 |
33.0–36.0 |
14.0–16.0 |
… |
… |
… |
| 347 |
0.08 |
2.00 |
0.040 |
0.030 |
1.00 |
9.0–13.0 |
17.0–20.0 |
… |
… |
B |
| 429 |
0.12 |
1.00 |
0.040 |
0.030 |
1.00 |
0.50 max |
14.0–16.0 |
… |
… |
… |
| 430 |
0.12 |
1.00 |
0.040 |
0.030 |
1.00 |
0.50 max |
16.0–18.0 |
… |
… |
… |
| 430-Ti |
0.10 |
1.00 |
0.040 |
0.030 |
1.00 |
0.075 max |
16.0–19.5 |
… |
5 × C min, |
… |
|
0.75 max |
||||||||||
▼Stainless steel coiled tubing /coiled tubes material grade:
| U.S.A. |
GERMANY |
GERMANY |
FRANCE |
JAPAN |
ITALY |
SWEDEN |
U.K. |
E.U. |
SPAIN |
RUSSIA |
|
AISI |
DIN 17006 |
W.N. 17007 |
AFNOR |
JIS |
UNI |
SIS |
BSI |
EURONORM |
||
|
201 |
SUS 201 |
|||||||||
|
301 |
X 12 CrNi 17 7 |
1.4310 |
Z 12 CN 17-07 |
SUS 301 |
X 12 CrNi 1707 |
23 31 |
301S21 |
X 12 CrNi 17 7 |
X 12 CrNi 17-07 |
|
|
302 |
X 5 CrNi 18 7 |
1.4319 |
Z 10 CN 18-09 |
SUS 302 |
X 10 CrNi 1809 |
23 31 |
302S25 |
X 10 CrNi 18 9 |
X 10 CrNi 18-09 |
12KH18N9 |
|
303 |
X 10 CrNiS 18 9 |
1.4305 |
Z 10 CNF 18-09 |
SUS 303 |
X 10 CrNiS 1809 |
23 46 |
303S21 |
X 10 CrNiS 18 9 |
X 10 CrNiS 18-09 |
|
|
303 Se |
Z 10 CNF 18-09 |
SUS 303 Se |
X 10 CrNiS 1809 |
303S41 |
X 10 CrNiS 18-09 |
12KH18N10E |
||||
|
304 |
X 5 CrNi 18 10 X 5 CrNi 18 12 |
1.4301 1.4303 |
Z 6 CN 18-09 |
SUS 304 |
X 5 CrNi 1810 |
23 32 |
304S15 304S16 |
X 6 CrNi 18 10 |
X 6 CrNi 19-10 |
08KH18N10 06KH18N11 |
|
304 N |
SUS 304N1 |
X 5 CrNiN 1810 |
||||||||
|
304 H |
SUS F 304H |
X 8 CrNi 1910 |
X 6 CrNi 19-10 |
|||||||
|
304 L |
X 2 CrNi 18 11 |
1.4306 |
Z 2 CN 18-10 |
SUS 304L |
X 2 CrNi 1911 |
23 52 |
304S11 |
X 3 CrNi 18 10 |
X 2 CrNi 19-10 |
03KH18N11 |
|
X 2 CrNiN 18 10 |
1.4311 |
Z 2 CN 18-10-Az |
SUS 304LN |
X 2 CrNiN 1811 |
23 71 |
|||||
|
305 |
Z 8 CN 18-12 |
SUS 305 |
X 8 CrNi 1812 |
23 33 |
305S19 |
X 8 CrNi 18 12 |
X 8 CrNi 18-12 |
|||
|
Z 6 CNU 18-10 |
SUS XM7 |
X 6 CrNiCu 18 10 4 Kd |
||||||||
|
309 |
X 15 CrNiS 20 12 |
1.4828 |
Z 15 CN 24-13 |
SUH 309 |
X 16 CrNi 2314 |
309S24 |
X 15 CrNi 23 13 |
|||
|
309 S |
SUS 309S |
X 6 CrNi 2314 |
X 6 CrNi 22 13 |
|||||||
|
310 |
X 12 CrNi 25 21 |
1.4845 |
SUH 310 |
X 22 CrNi 2520 |
310S24 |
20KH23N18 |
||||
|
310 S |
X 12 CrNi 25 20 |
1.4842 |
Z 12 CN 25-20 |
SUS 310S |
X 5 CrNi 2520 |
23 61 |
X 6 CrNi 25 20 |
10KH23N18 |
||
|
314 |
X 15 CrNiSi 25 20 |
1.4841 |
Z 12 CNS 25-20 |
X 16 CrNiSi 2520 |
X 15 CrNiSi 25 20 |
20KH25N20S2 |
||||
|
316 |
X 5 CrNiMo 17 12 2 |
1.4401 |
Z 6 CND 17-11 |
SUS 316 |
X 5 CrNiMo 1712 |
23 47 |
316S31 |
X 6 CrNiMo 17 12 2 |
X 6 CrNiMo 17-12-03 |
|
|
316 |
X 5 CrNiMo 17 13 3 |
1.4436 |
Z 6 CND 17-12 |
SUS 316 |
X 5 CrNiMo 1713 |
23 43 |
316S33 |
X 6 CrNiMo 17 13 3 |
X 6 CrNiMo 17-12-03 |
|
|
316 F |
X 12 CrNiMoS 18 11 |
1.4427 |
||||||||
|
316 N |
SUS 316N |
|||||||||
|
316 H |
SUS F 316H |
X 8 CrNiMo 1712 |
X 5 CrNiMo 17-12 |
|||||||
|
316 H |
X 8 CrNiMo 1713 |
X 6 CrNiMo 17-12-03 |
||||||||
|
316 L |
X 2 CrNiMo 17 13 2 |
1.4404 |
Z 2 CND 17-12 |
SUS 316L |
X 2 CrNiMo 1712 |
23 48 |
316S11 |
X 3 CrNiMo 17 12 2 |
X 2 CrNiMo 17-12-03 |
03KH17N14M2 |
|
X 2 CrNiMoN 17 12 2 |
1.4406 |
Z 2 CND 17-12-Az |
SUS 316LN |
X 2 CrNiMoN 1712 |
||||||
|
316 L |
X 2 CrNiMo 18 14 3 |
1.4435 |
Z 2 CND 17-13 |
X 2 CrNiMo 1713 |
23 53 |
316S13 |
X 3 CrNiMo 17 13 3 |
X 2 CrNiMo 17-12-03 |
03KH16N15M3 |
|
|
X 2 CrNiMoN 17 13 3 |
1.4429 |
Z 2 CND 17-13-Az |
X 2 CrNiMoN 1713 |
23 75 |
||||||
|
X 6 CrNiMoTi 17 12 2 |
1.4571 |
Z6 CNDT 17-12 |
X 6 CrNiMoTi 1712 |
23 50 |
320S31 |
X 6 CrNiMoTi 17 12 2 |
X 6 CrNiMoTi 17-12-03 |
08KH17N13M2T 10KH17N13M2T |
||
|
X 10 CrNiMoTi 18 12 |
1.4573 |
X 6 CrNiMoTi 1713 |
320S33 |
X 6 CrNiMoTI 17 13 3 |
X 6 CrNiMoTi 17-12-03 |
08KH17N13M2T 10KH17N13M2T |
||||
|
X 6 CrNiMoNb 17 12 2 |
1.4580 |
Z 6 CNDNb 17-12 |
X 6 CrNiMoNb 1712 |
X 6 CrNiMoNb 17 12 2 |
08KH16N13M2B |
|||||
|
X 10 CrNiMoNb 18 12 |
1.4583 |
X 6 CrNiMoNb 1713 |
X 6 CrNiMoNb 17 13 3 |
09KH16N15M3B |
||||||
|
317 |
SUS 317 |
X 5 CrNiMo 1815 |
23 66 |
317S16 |
||||||
|
317 L |
X 2 CrNiMo 18 16 4 |
1.4438 |
Z 2 CND 19-15 |
SUS 317L |
X 2 CrNiMo 1815 |
23 67 |
317S12 |
X 3 CrNiMo 18 16 4 |
||
|
317 L |
X 2 CrNiMo 18 16 4 |
1.4438 |
Z 2 CND 19-15 |
SUS 317L |
X 2 CrNiMo 1816 |
23 67 |
317S12 |
X 3 CrNiMo 18 16 4 |
||
|
330 |
X 12 NiCrSi 36 16 |
1.4864 |
Z 12NCS 35-16 |
SUH 330 |
||||||
|
321 |
X 6 CrNiTi 18 10 X 12 CrNiTi 18 9 |
1.4541 1.4878 |
Z 6 CNT 18-10 |
SUS 321 |
X 6 CrNiTi 1811 |
23 37 |
321S31 |
X 6 CrNiTi 18 10 |
X 6 CrNiTi 18-11 |
08KH18N10T |
|
321 H |
SUS 321H |
X 8 CrNiTi 1811 |
321S20 |
X 7 CrNiTi 18-11 |
12KH18N10T |
|||||
|
329 |
X 8 CrNiMo 27 5 |
1.4460 |
SUS 329J1 |
23 24 |
||||||
|
347 |
X 6 CrNiNb 18 10 |
1.4550 |
Z 6 CNNb 18-10 |
SUS 347 |
X 6 CrNiNb 1811 |
23 38 |
347S31 |
X 6 CrNiNb 18 10 |
X 6 CrNiNb 18-11 |
08KH18N12B |
|
347 H |
SUS F 347H |
X 8 CrNiNb 1811 |
X 7 CrNiNb 18-11 |
|||||||
|
904L |
1.4939 |
Z 12 CNDV 12-02 |
||||||||
|
X 20 CrNiSi 25 4 |
1.4821 |
|||||||||
|
UNS31803 |
X 2 CrNiMoN 22 5 |
1.4462 |
||||||||
|
UNS32760 |
X 3 CrNiMoN 25 7 |
1.4501 |
Z 3 CND 25-06Az |
|||||||
|
403 |
X 6 Cr 13 X 10 Cr 13 X 15 Cr 13 |
1.4000 1.4006 1.4024 |
Z 12 C 13 |
SUS 403 |
X 12 Cr 13 |
23 02 |
403S17 |
X 10 Cr 13 X 12 Cr 13 |
X 6 Cr 13 |
12Kh13 |
|
405 |
X 6 CrAl 13 |
1.4002 |
Z 6 CA 13 |
SUS 405 |
X 6 CrAl 13 |
405S17 |
X 6 CrAl 13 |
X 6 CrAl 13 |
||
|
X 10 CrAl 7 |
1.4713 |
Z 8 CA 7 |
X 10 CrAl 7 |
|||||||
|
X 10 CrAl 13 |
1.4724 |
X 10 CrAl 12 |
10Kh13SYu |
|||||||
|
X 10 CrAl 18 |
1.4742 |
X 10 CrSiAl 18 |
15Kh18SYu |
|||||||
|
409 |
X 6 CrTi 12 |
1.4512 |
Z 6 CT 12 |
SUH 409 |
X 6 CrTi 12 |
409S19 |
X 5 CrTi 12 |
|||
|
X 2 CrTi 12 |
||||||||||
|
410 |
X 6 Cr 13 X 10 Cr 13 X 15 Cr 13 |
1.4000 1.4006 1.4024 |
Z 10 C 13 Z 12 C 13 |
SUS 410 |
X 12 Cr 13 |
23 02 |
410S21 |
X 12 Cr 13 |
X 12 Cr 13 |
12Kh13 |
|
410 S |
X 6 Cr 13 |
1.4000 |
Z 6 C 13 |
SUS 410S |
X 6 Cr 13 |
23 01 |
403S17 |
X 6 Cr 13 |
08Kh13 |
Factory
Quality advantage:
The quality of our products for the control line in oil and gas sector is assured not just during the controlled manufacturing process but also by way of finished product testing. Typical tests include:
1.Non-destructive tests
2. Hydrostatic tests
3.Surface finish controls
4. Dimensional accuracy measurements
5.Flare and coning tests
6. Mechanical and chemical property testing
Application caillary tube
1) Medical device industry
2) temperature-guided industrial temperature control, sensors used pipe, tube thermometer
3) Pens care industry core tube
4) micro-tube antenna, various types of small precision stainless steel antenna
5) With a variety of electronic small-diameter Stainless steel capillary
6) Jewelry needle punch
7) Watches, picture
8) Car antenna tube, bar antennas using tubes, antenna tube
9) Laser engraving equipment to use stainless steel tube
10) Fishing gear, accessories, Yugan out with possession of
11) Diet with stainless steel capillary
12) all types of mobile phone stylus a computer stylus
13) Heating pipe industry, oil industry
14) Printers, silent box needle
15) Pull a double-melt stainless steel tube used in window-coupled
16) A variety of industrial small diameter Precision stainless steel tubes
17) Precision dispensing with stainless steel needles
18) Microphone, headphones and microphone to use stainless steel tube, and so on
Discount wholesale Stainless Steel Round Tube - AISI 304 stainless steel polishing tube – Sihe Related Video: