Factory directly 3/4 Inch Stainless Steel Pipe - Factory source 304 Stainless Steel Plate / Stainless Steel Sheet 304 – Sihe
We insist around the principle of enhancement of ‘High good quality, Performance, Sincerity and Down-to-earth working approach’ to provide you with superb assistance of processing for Factory source 304 Stainless Steel Plate / Stainless Steel Sheet 304, We are going to endeavor to maintain our great status as the very best solutions supplier in the earth. When you have any questions or opinions, be sure to contact with us freely.
We insist around the principle of enhancement of ‘High good quality, Performance, Sincerity and Down-to-earth working approach’ to provide you with superb assistance of processing for 304 Stainless Steel Plate, 304 Stainless Steel Sheet, We are going to not only continuously introduce technical guidance of experts from both home and abroad, but also develop the new and advanced merchandise constantly to satisfactorily meet the needs of our clients all over the world.
Stainless steel sheet
Thickness: 10mm-100mm & 0.3mm-2mm
Width: 1.2m, 1.5m or as per request
Technique: Cold rolled or hot rolled
Surface treatment: Polished or as requirement
Application:
Steel sheet applies to construction field, ships building industry, petroleum& chemical industries, war and electricity industries, food processing and boiler heat exchanger machinery and hardware fields etc.
Quality standard: GB 3274-2007 or equivalent to ASTM/JIS/DIN/BS etc
Steel grade:
200, 300, 400 series
( 201, 202, 304, 304L, 309S, 310S, 316, 316L, 317L, 321, 347H, 409410S, 420, 430, etc)
Type: Steel plate
Special use: High-strength steel plate
If you need, pls contact with me freely. Your response will be highly appreciated.
1. Chemical Requirements
| pecification | Steel Grade | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Ti% | OTHER |
| Max. | Max. | Max. | Max. | Max. | |||||||
| JIS | SUS301 | 0.15 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 6.00-8.00 | |||
| G4303 | SUS302 | 0.15 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.00 | |||
| G4304 | SUS304 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-10.50 | |||
| G4305 | SUS304L | 0.03 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 9.00-13.00 | |||
| G4312 | SUS304J3 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.50 | Cu:1.00-3.00 | ||
| SUH309 | 0.2 | 1 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
| SUS309S | 0.08 | 1 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
| SUH310 | 0.25 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
| SUS310S | 0.08 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
| SUS316 | 0.08 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | |||
| SUS316L | 0.03 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | |||
| SUS317 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | |||
| SUS321 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | 5*C Min. | |||
| SUS347 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | Nb:10*C Min. | |||
| SUSXM7 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.50-10.50 | Cu:3.00-4.00 | |||
| SUH409 | 0.08 | 1 | 1 | 0.04 | 0.03 | 10.50-11.75 | 6*C to 0.75 | ||||
| SUH409L | 0.03 | 1 | 1 | 0.04 | 0.03 | 10.50-11.75 | 6*C to 0.75 | ||||
| SUS410 | 0.15 | 1 | 1 | 0.04 | 0.03 | 11.50-13.50 | |||||
| SUS420J1 | 0.16-0.25 | 1 | 1 | 0.04 | 0.03 | 12.00-14.00 | |||||
| SUS420J2 | 0.26-0.40 | 1 | 1 | 0.04 | 0.03 | 12.00-14.00 | |||||
| SUS430 | 0.12 | 0.75 | 1 | 0.04 | 0.03 | 16.00-18.00 | |||||
| SUS434 | 0.12 | 1 | 1 | 0.04 | 0.03 | 16.00-18.00 | 0.75~1.25 | ||||
| ASTM Specification | |||||||||||
| Specification | Steel Grade | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Ti% | OTHER |
| Max. | Max. | Max. | Max. | Max | |||||||
| ASTM | S30100 | 0.15 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 6.00-8.00 | N:0.10 Max | ||
| A240 | S30200 | 0.15 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.00 | N:0.10 Max | ||
| S30400 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-10.5 | N:0.10 Max | |||
| S30403 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-12.00 | N:0.10 Max | |||
| S30908 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
| S31008 | 0.08 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
| S31600 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | N:0.10 Max | ||
| S31603 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | N:0.10 Max | ||
| S31700 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | N:0.10 Max | ||
| S32100 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-12.00 | 5*(C+N) Min. | N:0.10 Max | ||
| 0.70 Max | |||||||||||
| S34700 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | Cb:10*CM in. | |||
| 1.00 Max | |||||||||||
| S40910 | 0.03 | 1 | 1 | 0.045 | 0.03 | 10.50-11.70 | 0.5Max | Ti:6*CMin. | |||
| 0.5 Max. | |||||||||||
| S41000 | 0.15 | 1 | 1 | 0.04 | 0.03 | 11.50-13.50 | 0.75Max | ||||
| S43000 | 0.12 | 1 | 1 | 0.04 | 0.03 | 16.00-18.00 | 0.75Max |
Surface for stainless steel :
Our warehouse:
Factory directly 3/4 Inch Stainless Steel Pipe - Factory source 304 Stainless Steel Plate / Stainless Steel Sheet 304 – Sihe Related Video: